6-LED-MR8
LED Colour
6-LED-MR8
LED Colour
|

6 LED MR8

  • Code: 6LEDMR8
  • |
  • Stock: In Stock

The 6-LED MR8 has been designed to replace a 10W MR8 halogen. It uses the same cap as the halogen MR8 so replacement is straight forward.

Please note this lamp is not widely used, the more commonly used lamp in this style is the MR11 lamp. Please check the diameter of your existing fitting, the MR8 has a 25mm diameter, the MR11 has a 35mm diameter.

Regulated for use on 10-30V DC
Diameter – 25mm
Approximate light output – 139lm CW / 122lm WW
1.0W power consumption
3 year guarantee

Please note this is a listing for a single unit of the 6-LED MR8 i.e.1 lamp

The MR8 halogen is not a commonly used lamp although is sometimes used in spot lights, reading lights and extractor hoods and is easily replaced with an LED alternative. The MR8 halogen is easily identified as a conical shaped lamp with a 25mm diameter and two short pins spaced 4mm apart – it is similar to the more common MR11 lamp but has a smaller diameter. If the diameter of your lamp is larger, please take a look at our MR11 or MR16 sections of the website. The 6-LED MR8 is the 10W halogen replacement and provide a convenient replacement as the cap used is exactly the same size as the halogen. All control circuitry for the LEDs is located within the cap so it is just a case of remove the halogen and replace with our LED alternative.

£4.79

You may also like…

Description

The MR8 halogen is not a commonly used lamp although is sometimes used in spot lights, reading lights and extractor hoods and is easily replaced with an LED alternative. The MR8 halogen is easily identified as a conical shaped lamp with a 25mm diameter and two short pins spaced 4mm apart – it is similar to the more common MR11 lamp but has a smaller diameter. If the diameter of your lamp is larger, please take a look at our MR11 or MR16 sections of the website. The 6-LED MR8 is the 10W halogen replacement and provide a convenient replacement as the cap used is exactly the same size as the halogen. All control circuitry for the LEDs is located within the cap so it is just a case of remove the halogen and replace with our LED alternative.

Additional information

LED Colour

,